Basecoat Poli 5ml

a hybryde base coat has been enriched with acrylic powder for an extra sturdy, strongly raved basis. The outpatient base makes the nails more resistant to damage and ensures that manicures last longer. The acid-free formula is mild for the natural nails. Thanks to the thick consistencies you can easily apply the Basecoat and is also suitable for shaping and extension of the nails. The base is suitable for all nail types, from thin and weakened nails that need extra paving to strong nails that need extremely good adhesion. The Poli Base is a multifunctional product and is compatible with Claresa Gellak, Builder Gel and Acrylelgel. Density: 4/5 Use: Apply the basecoat to a matted and degreased nail plate. Apply in thin layers and hard under a UV/LED lamp. Ends at least 60 seconds. Then apply a layer of gellak in a color of your choice and hard it. Finish with a topcoat and hard it also under the UV/LED lamp. You can also use an acid -free primer prior to the basecoat. Read the full user manual and instructions for removing gellak at the bottom of this page. Plus- en minpunten Verhardende transparante basecoat met acrylpoeder Maakt de nagels sterker en beter bestand tegen beschadigingen Dikke consistentie is geschikt om de nagels op te bouwen Geniet langer van een mooie manicure Compatibel met gellak, builder gel en acryl Verhoogt de hechting van de nagellak Snel uitgehard onder een UV/LED lamp Gebruiksaanwijzing: Stap 1: Maak de nagels schoon en vijl ze in de Desired shape, Step 2: Remove the shine from the natural nails with a polishing block, Step 3: Push the cuticles back with a goat boat and possibly remove them with a cuticle tongs, step 4: Clean the nails and dust -free with a cleaner and wait until the nails are dry, Step 5: apply a thin layer of primer to the nails. Wait until it is dry, this takes about 30 seconds, step 6: apply a thin layer of base coat and hard the nails under a lamp. Depending on the Basecoat 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp, step 7: Apply one thin layer of the hybrid gellak and hard the nails under a lamp. 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp, step 8: If desired, apply a layer of hybrid paint and repeat the above step until the desired coverage is reached, step 9: apply a topcoat and hard the nails under the lamp. 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp, Step 10: Then clean the nails with a cleaner to remove the sticky layer, step 11: Massage the skin around your nails as extra care with a caring nail cream or cuticle oil. Note: More pigmented colors, such as black and white, may require a longer curing time. It is important to apply these layers thinly and, if necessary, to paint and harden a second time to achieve the desired coverage. Removing the Claresa UV/LED Hybrid Soakoff Gel nail polish: Step 1: Carefully file the topcoat off the nails, Step 2: Soak a cotton pad in nail remover and place the cotton ball on the nails, Step 3: Make sure that the nail plate is completely covered. You can use nail remover foil for this. Wrap your finger firmly here, step 4: Check after a few minutes if the paint is loose. If this is not the case, wait a little longer, step 5: When the gellak is released, remove the remains with an Orange Woodstick, step 6: After removing, use a hand cream and a cuticle oil for the optimum care of the hands. Ingrediënten: Urethaanacrylaat, isopropylideendifenylbisoxyhydroxypropylmethacrylaat, HEMA, polymethylmethacrylaat, isobornylmethacrylaat, celluloseacetaatbutyraat, hydroxycyclohexylfenylketon, HEMA-fosfaat, ethyltrimethylbenzoylfenylfosfinaat, silicadimethylsilylaat, polyhydroxycarbonzuuramiden, PPG-3, hydrochinon, p-hydroxyanisole, polyetheracrylaat, dipropyleenglycoldiacrylaat, polyesteracrylaat +/- mica, CI 77891, CI 74260, CI 74160, CI 60725, CI 45410, CI 77742, CI 77491, CI 77492, CI 77499, CI 19140, CI 77007, CI 77004, CI 16035 This article is only for professional use and can be an allergic reaction.